Pro-Package for 75 Manual Safety

NOTE:  When using our CGW sear in the Shadow and Tactical Sport models, a machined aluminum spacer is required.  See our part number sspacer.  No spacer is needed for the firing pin block model CZ's.

Made in the USA, this part helped revolutionize CZ home gunsmithing. Allows anyone to drop in a high-performance hammer and effortlessly establish the perfect clearance between the sear nose and manual safety to ensure a safe outcome.

The heat treated SS screw has a very high thread count, which allows more surface area than needed to permanently bond the screw to the sear body.

A concept so simple and so easy to do, the setting procedure is virtually fool-proof.  Once the loctite sets, the sear becomes a one piece part with an unlimited, trouble-free life-span.  We unconditionally guarantee it for life to the original purchaser.

Made from premium high carbon steel, heat treated, and mirror polished. Makes installation of the Cajun Gun Works Race hammer or the CZ Competition hammer the easiest part of the upgrade.  Only the CGW adjustable sear has a secondary angle built in, which helps ensure a crisper break compared to the factory sear.

See "Description" for additional information.

Installation Instructions

** Note: Non Firing Pin Block firearms such as the Shadow 2, will require a sear spacer. To order this item please click the link.  https://cajungunworks.com/product/s-spacer-sear-spacer/

A must have for virtually all 75 series CZ's.  Developed nearly 10 years ago, this pin has been put to the test globally in tens of thousands of CZ's under every imaginable condition.

Made from the best steel, then precision finish ground to exactly the same size as the factory original throw-away trigger pivot pin.  Our pin is designed to work with either the stock trigger return spring or the slightly narrower CGW reduced power trigger return spring.

Don't buy a cheap imitation of of the original floating trigger pin.  The CGW pin is bet-your-life reliable and real world tested in every corner of the globe.  Can be removed an unlimited number of times, making the CZ design routinely serviceable.   Allows you to replace a broken trigger return spring anywhere, anytime, in a matter of minutes.  See our RPTRS trigger return if want a better spring.

Comes with a super handy installation slave pin for retaining the trigger return spring, making installation of the trigger a breeze.  We strongly suggest you get our starter punch, part number SP, to break the tough flare on the original factory pin.

See "Description" for tech tips

CGW's reduced power trigger return spring reduces the DA an amazing 1/2 pound, yet still delivers a quick, positive reset.  CGW was the first company to offer an improved trigger return spring and our spring has been proven in years of use.

This CGW Made in the USA spring dramatically improves durability and reliability.  The known weak link in the trigger system is the factory trigger return spring that can 'snap' off the long leg of the spring = dead trigger.  Better quality music wire and a slight reduction in wire size equates to a much longer, if not indefinite life for the CGW spring.

A virtual must have for all CZ's that use this style trigger return spring.  Fits all CZ's that use this style spring.

See "Description" for important installation information.

These are super hard, heat treated to RC60, and are a friction fit in Cajun Gun Works hammers, so no staking or peening is required.  Requires 2 for DA/SA pistols; only 1 is needed for single-action only pistols.  Fits virtually all CZ's that use a CGW performance hammer.

One end of the HPIN has a slight bevel to ensure it starts into the hammer easily.  This bevel also ensures the pin starts straight, eliminating any misalignment.

NOTE:  For factory CZ hammers including CGW part numbers 10035, 10035 D/C, and 10040 CZ Competition hammers and hammer kit, a different hammer pin is needed, see our part number 75009.

See "Description" for Tech Tips and important install information.

Fits virtually all CZ's that use the factory phillips head screw.  Heat treated and a great replacement for the factory screws.  Price is per screw.

NOTE:  Not recommended for any grips that use a flat head screw and/or a tapered hole, see our bevel head screw, 00135 for this application.  Does not fit RAMI.

Very popular USA made from music wire 13# hammer spring color-coded "blue". Must be used with our 97041 or 97045

CGW's reduced power firing pin spring used on our 61050 extended firing pin.  Also recommended if you are going with a lighter hammer spring and retaining the stock firing pin.

Tempered spring steel firing pin retaining pin.  Our 61100 acts like a mini-shock absorber and can withstand repeated impacts from the firing pin.  Cushions the firing pin shoulder from damage.

Fits all CZ's that use a firing pin block system.

Installation note:  Always install the open end of the spring pin in the 12 0'clock position/facing the top of the slide.  A 3 mm roll pin punch is the ideal tool for removal and installation.

CGW's short arm lifter.  Perfect single-action short reset upgrade if you already have our 61050 or 61060 low-lift firing pin.  Made in the USA.

Must be used with our 61050 or 61060 low-lift firing pin.

Made in the USA from premium S-7 tool steel, heat treated to perfection, this is the firing pin ONLY.  Extended length to ensure reliable ignition with reduced power hammer springs.

Fits virtually all CZ's with a firing pin block safety (excluding 97B/BD, see part number 61060), including 75 series and 85B, P-07/09, 40 series, and P-01 75B Omega.

NOTE:  This firing is safe for carry with a round loaded in the chamber and the hammer in the down position.   For use with reduced power hammer springs only and selected hammer spring varies with model, please contact CGW for recommendations or see "Description" for additional info.

Extremely popular 11.5#, "black" hammer spring commonly used in the Shadow 1 & 2.  The matching FP spring is part number for S 1 & 2 is 97045.

If used in the firing pin block equipped CZ's, SP-01, 75B, P-01, 75D/PCR, etc. an extended firing pin is recommended, part number 61050.

Often lost, seldom found.

Made in the USA to the same physical dimensions as the factory spring.  Good idea to order a spare or two, especially if you are working on a decocker CZ.   This little spring will derail your upgrade if it "jumps" out of the sear cage.   This is a universal spring that fits virtually all CZ 75 series models that use a firing pin block.

NOTE:  Does not fit P-07/09, 75B & P-01 Omega

Extra heavy firing pin block plunger spring, can increase the SA pull weight up to 14 ounces.

Does not affect the DA pull weight.

Lite weight firing pin block plunger spring delivers a reduced trigger pull.