No products in the cart.
Complete performance upgrade spring kit, reduces the double-action pull dramatically. USA made from premium music wire.
From: $29.00
Very popular USA made from music wire 13# hammer spring color-coded "blue". Must be used with our 97041 or 97045
In stock
Tempered spring steel firing pin retaining pin. Our 61100 acts like a mini-shock absorber and can withstand repeated impacts from the firing pin. Cushions the firing pin shoulder from damage.
Fits all CZ's that use a firing pin block system.
Installation note: Always install the open end of the spring pin in the 12 0'clock position/facing the top of the slide. A 3 mm roll pin punch is the ideal tool for removal and installation.
CGW's reduced power firing pin spring used on our 61050 extended firing pin. Also recommended if you are going with a lighter hammer spring and retaining the stock firing pin.
CGW's reduced power trigger return spring reduces the DA an amazing 1/2 pound, yet still delivers a quick, positive reset. CGW was the first company to offer an improved trigger return spring and our spring has been proven in years of use.
This CGW Made in the USA spring dramatically improves durability and reliability. The known weak link in the trigger system is the factory trigger return spring that can 'snap' off the long leg of the spring = dead trigger. Better quality music wire and a slight reduction in wire size equates to a much longer, if not indefinite life for the CGW spring.
A virtual must have for all CZ's that use this style trigger return spring. Fits all CZ's that use this style spring.
Lite weight firing pin block plunger spring delivers a reduced trigger pull.
Made in the USA from premium S-7 tool steel and heat-treated to perfection. Extended length to ensure reliable ignition with reduced power hammer springs.
A must have for virtually all 75 series CZ's. Developed nearly 10 years ago, this pin has been put to the test globally in tens of thousands of CZ's under every imaginable condition.
Made from the best steel, then precision finish ground to exactly the same size as the factory original throw-away trigger pivot pin. Our pin is designed to work with either the stock trigger return spring or the slightly narrower CGW reduced power trigger return spring.
Extra heavy firing pin block plunger spring, can increase the SA pull weight up to 14 ounces.
Does not affect the DA pull weight.