(318) 738-1464

cajungunworks@gmail.com

Cajun Gun Works uses reasonable efforts to portray accurate, up-to-date information. Products can vary slightly due to manufacturing variations.

CZ SP-01 Phantom Parts

Grid
List

Hammer Strut Full Size

20 Hammer Strut Full Size

Fits full size 9mm and .40 S&W CZ's including the CZ-97B/BD and Tactical Sport. This is a CZ OEM hammer strut.

Decocker Lever Spring

62 Decocker Lever Spring

"USA Made" decocker lever spring used in standard lock work 75 decockers compacts and full size, RAMI, SP-01, 97BD, Phantom, etc. NOTE: Go to the CGW home ...

Hammer Pin

75009 Hammer Pin

Designed for use in the CZ-UB factory competition hammer only (CGW part number 10040, 10035, and 10035 D/C). These pins require no staking, instead they utilize...

Decocker Sear

Decocker Sear

CZ factory decocker sear this is a universal part in the 75 series decockers that use the "classic" lock work, 75BD, P-01, 75D, RAMI, 97BD, Phantom, etc.

Decocker OEM Sear Cage

Sear Cage Decocker

CZ factory #10 sear cage for decocker models, bare, no internal parts included, fits 9mm & 40SW 75 series. NOTE: Does not fit the CZ97B or BD.

Sear Spring

12 Sear Spring

CZ sear spring Made in the USA from premium music wire, fits virtually all 75 series CZ's, including manual safety and decockers. This is a universal part in ...

Hammer Pivot Pin Retaining Peg

19 Hammer Pivot Pin Retaining Peg

CZ factory #19 retaining pin peg, keeps the #18 hammer pivot pin from walking out of the frame, fits virtually all 75 full size, compacts, Shadows (all), 85B/C,...

Hammer Spring Plug Full Size

22 Hammer Spring Plug Full Size

CZ factory full size flat hammer spring plug, eliminates the lanyard loop, fits all virtually 75 full size, 85B/C, all Shadows, 97B-BD, etc.

New Style Slide Stop Spring

3NS Slide Stop Spring New Style

This is the new style factory slide stop spring. This will not fit the earlier models. This spring has a very short right angle leg, whereas the old style s...

Slide Stop Spring Retention Pin

4 Slide Stop Spring Retention Pin

Factory pin that retains the slide stop spring.

Front Sight Retaining Pin

46 Front Sight Retaining Pin

Fits all CZ's and Canik's that use a parallel dovetailed front sight that is retained with a front sight cross pin.

Extractor Pin

51 Extractor Pin

Made in the USA extractor pin, much harder and more durable than the factory pin. This pin fits all 75 full size and compacts, Shadow 1 & 2, 85B&C, P-...

Extractor Spring

52 Extractor Spring

"Made in USA" extractor spring for virtually all 75 full size, compacts, Shadow, 85B & 85C, P-01, PCR, 40B, 97B-BD, RAMI, Phantom, 75B and BD, SP-01's, Shad...

Firing Pin Block Plunger 9mm

58 Firing Pin Block Plunger 9mm

Factory CZ firing pin plunger for use in firing pin block system pistols. Used for both the standard lock work 9 mm and 40 SW caliber and 75 series including ...

Lifter Spring

L-Spring Lifter Spring

Often lost, seldom found. Made in the USA to the same physical dimensions as the factory spring. Good idea to order a spare or two, especially if you are w...

OEM Trigger Bar Decocker

Trigger Bar Decocker

CZ factory decocker specific trigger bar, fits all standard lock work 75 series decocker's, full size, compacts, RAMI's and Phatom. NOTE: Does not fit the ...

Firing Pin Retaining Pin

61100 Firing Pin Retaining Pin

Tempered spring steel firing pin retaining pin. Our 61100 acts like a mini-shock absorber and can withstand repeated impacts from the firing pin. Cushions t...

Decocker Slave Pin

Decocker Slave Pin

See "Description" for very important tech tips. A must for the installation of the decocker sear cage. It is impossible to reassemble the sear cage without...

Decocker Sear Pin

13 Decocker Sear Pin

Item number #13, long decocker sear pin. Fits most decocker CZ's, SP-01 Tactical, 75BD, Phantom, P-01, 75D/PCR, RAMI-BD, CZ97-BD, 40P, etc.

Recoil Spring Plug Retaining Pin

23 Hammer Spring Plug Retaining Pin

Pin that retains the hammer spring plug. Fits virtually all 75 full size, compacts, all Shadows, 85B/C, 40B, SP-01's, 97B/BD, etc. NOTE: Does not fit RAMI....

Magazine Guide Retaining Pin

25 Magazine Guide Pin

Upper magazine retaining pin fits all CZ's that use a sheet metal magazine guide.

Canik Floating Trigger Pin

CZ SP-01 Phantom/ IWI Floating Trigger Pin

Fits the CZ SP-01 Phantom that uses the 2.5 mm trigger pin. Ditch that cheap roll pin for this ground and heat treated. Includes a trigger return spring ins...

Hammer Pin

HPIN Hammer Pin

See "Description" for important installation information. These are super hard, heat treated to RC60, and are a friction fit in Cajun Gun Works hammers, so n...

Showing all 23 results