CZ SP-01 Manual Safety Parts

New Style Slide Stop Spring

3NS Slide Stop Spring New Style

This is the new style factory slide stop spring.  This will not fit the earlier models.  This spring has a very short right angle leg, whereas the old style s...
$2.00
In Stock
Add to cart
Add to Wishlist
Compare
Slide Stop Spring Retention Pin

4 Slide Stop Spring Retention Pin

Factory pin that retains the slide stop spring.
$2.00
Out of Stock
Read more
Add to Wishlist
Compare
Front Sight Retaining Pin

46 Front Sight Retaining Pin

Fits all CZ's and Canik's that use a parallel dovetailed front sight that is retained with a front sight cross pin.
$1.00
In Stock
Add to cart
Add to Wishlist
Compare
Extractor Pin

51 Extractor Pin

Made in the USA extractor pin, much harder and more durable than the factory pin.  This pin fits all 75 full size and compacts, Shadow 1 & 2, 85B&C, P-...
$3.00
In Stock
Add to cart
Add to Wishlist
Compare
Extractor Spring

52 Extractor Spring

"Made in USA" extractor spring for virtually all 75 full size, compacts, Shadow, 85B & 85C, P-01, PCR, 40B, 97B-BD, RAMI, Phantom, 75B and BD, SP-01's, Shad...
$2.00
In Stock
Add to cart
Add to Wishlist
Compare
Firing Pin Block Plunger 9mm

58 Firing Pin Block Plunger 9mm

Factory CZ firing pin plunger for use in firing pin block system pistols.  Used for both the standard lock work 9 mm and 40 SW caliber and 75 series including ...
$9.00
Out of Stock
Read more
Add to Wishlist
Compare
Manual Safety Trigger Bar

7 Trigger Bar Manual Safety

CZ OEM trigger bar for the manual safety CZ's.  Fits 75 series full size and compact series, SP-01, RAMI, 85B & C, 40B, etc.
$35.00
In Stock
Add to cart
Add to Wishlist
Compare
Bevel Head Grip Screw

Bevel Head Grip Screw

This is not a factory part, but meets or exceeds OEM quality.  Made from 4140 steel heat treated, this is a flat head, side beveled screw for use with torx 20 ...
$4.00
In Stock
Add to cart
Add to Wishlist
Compare
Lifter Spring

L-Spring Lifter Spring

Often lost, seldom found. Made in the USA to the same physical dimensions as the factory spring.  Good idea to order a spare or two, especially if you are w...
$3.00
In Stock
Add to cart
Add to Wishlist
Compare
CZ Shadow 2 Magazine Catch

Magazine Catch for Shadow 2

OEM Shadow 2 magazine release complete with the serrated "paddle" on the left hand side.  The paddle is adjustable and can be set to your preference.  Will fi...
$35.00
Out of Stock
Read more
Add to Wishlist
Compare

Retaining Screw

This screw retains the trigger bar support spring and mag spring, fits all 75 full size and compacts, Shadow 1 & 2, SP-01's, 85B/C, P-01, 75B/BD, 75D/PCR, 4...
$2.00
In Stock
Add to cart
Add to Wishlist
Compare
Reach Reduction Kit

Reach Reduction Kit

Cajun Gun Works' Reach Reduction Kit moves the at rest position of the trigger rearward an amazing 5.0 mm's.   The "felt" difference is quite dramatic and co...
$88.00 – $103.00
In Stock
Select options
Add to Wishlist
Compare
Reach Reduction Kit Type 2

RRKT2 Reach Reduction Kit Type 2

PLEASE NOTE:  The RRK-T2 must be used with SRS-2 (Short Reset System).  Failure to install the SRS2 will result in a non-functional pistol. Our famous RRK ...
$88.00 – $103.00
In Stock
Select options
Add to Wishlist
Compare
Dawson Precision Fiber Optic Front Sight 6.5 mm

050-278 Dawson Precision Fiber Optic Front Sight 6.5 mm

All steel fiber optic front sight works with most "Tactical" or competition rear sights.   Measures 6.5mm's total height (.260").  .095" wide so you get more...
$40.00
In Stock
Add to cart
Add to Wishlist
Compare
Dawson Precision Fiber Optic Front Sight

050-390 Dawson Precision Fiber Optic Front Sight

This fully machined fiber optic sight is the same height as the CZ factory front sight (.215") used in the majority of the 75 series.  Since this sight is narr...
$40.00
In Stock
Add to cart
Add to Wishlist
Compare
CZ SP-01 Dawson Precision Fiber Optic Sight Set

310-216 Dawson Precision Fiber Optic Sight Set for CZ SP-01

Quality all steel construction Dawson Precision sight set with F/O used in both the front and rear.   As with all replacement sights, very minor fitting is re...
$89.00
In Stock
Add to cart
Add to Wishlist
Compare

Dawson Precision Fully Adjustable Rear Sight Only

Simply the best fully adjustable direct replacement CZ sight on the market.  This sight is fully adjustable for windage and elevation with the turn of a screw....
$90.00
In Stock
Add to cart
Add to Wishlist
Compare
Rear Sight Only

EZD Rear Sight Only

Designed for shooters over 40.  Features our unique "trapezoid" serrations that create a contrast unlike any other sight on the market.  Makes picking up the ...
$48.00
In Stock
Add to cart
Add to Wishlist
Compare
Fiber Optic Sight Set

EZD940 Fiber Optic Sight Set

CGW's popular sight set especially designed for shooters over 40.  Features a unique .125W x .140D rear notch, mated with our relatively narrow .095"W front fi...
$88.00
In Stock
Add to cart
Add to Wishlist
Compare
Fiber Optic Front Sight

Fiber Optic Front Sight

Fiber optic front sight for our 017-018 fully adjustable rear sight. NOTE: Never order a replacement front sight for your CZ until you measure the actual bla...
$40.00
In Stock
Add to cart
Add to Wishlist
Compare
1mm Red Fiber Optic Rod

Fiber Optic Rod 1 mm

1mm fiber optic rod sold by the inch. If you order 3 inches for example, you will receive one piece, 3 inches long. CGW purchases F/O rod in long lengths ...
$1.50
In Stock
Select options
Add to Wishlist
Compare

Holosun HS507C Micro Red Dot System

The Holosun HS507C Micro Red Do System is a pistol-sized optic that will help you nail your targets with pinpoint accuracy.  Thanks to their CR2032 batteries, ...
$310.00
In Stock
Read more
Add to Wishlist
Compare
Meprolight Hyper Bright Sights

Meprolight Hyper Bright CZ 75/85/SP-01 Fixed Sight Set

Front and rear sight both have green tritium with the front sight having an orange ring.
$100.00
In Stock
Add to cart
Add to Wishlist
Compare
Fully Adjustable Rear Sight

TPU57CZ07 Fully Adjustable Rear Sight

Fits the OEM CZ dovetail.  No machining required!  We recommend the 050-278 fiber optic front sight.  All steel with black serrated rear blade.  Fits:  SP-...
$90.00
In Stock
Add to cart
Add to Wishlist
Compare
Extended Firing Pin

61050 Extended Firing Pin

Made in the USA from premium S-7 tool steel, heat treated to perfection, comes with a reduced power FP spring.   Extended length to ensure reliable ignition w...
$25.00
In Stock
Add to cart
Add to Wishlist
Compare
Firing Pin Retaining Pin

61100 Firing Pin Retaining Pin

Tempered spring steel firing pin retaining pin.  Our 61100 acts like a mini-shock absorber and can withstand repeated impacts from the firing pin.  Cushions t...
$5.00
In Stock
Add to cart
Add to Wishlist
Compare
Firing Pin Spring

97041 Firing Pin Spring

CGW's reduced power firing pin spring used on our 61050 extended firing pin.  Also recommended if you are going with a lighter hammer spring and retaining the ...
$5.00
In Stock
Add to cart
Add to Wishlist
Compare
15# Hammer Spring

#15 Hammer Spring

Very popular music wire 15# hammer spring color-coded "Gold".  Must be used with our Reduced Power Firing Pin Spring.
$7.00
In Stock
Add to cart
Add to Wishlist
Compare
13# Hammer Spring

13# Hammer Spring

Very popular USA made from music wire 13# hammer spring color-coded "blue". Must be used with our 97041 or 97045
$7.00
In Stock
Add to cart
Add to Wishlist
Compare
Ultra-Lite Kit

54420 Ultra-Lite Kit

A very popular and extremely effective upgrade.  Tens of thousands are in service worldwide.  Fixes the minor design issue with the factory firing pin.   Co...
$49.00
In Stock
Add to cart
Add to Wishlist
Compare

Showing 31–60 of 93 results