(318) 738-1464

cajungunworks@gmail.com

Cajun Gun Works uses reasonable efforts to portray accurate, up-to-date information. Products can vary slightly due to manufacturing variations.

CZ Shadow Line Parts

Grid
List

11.5# Hammer Spring

HS-12000 11.5# Hammer Spring

Extremely popular 11.5#, "black" hammer spring commonly used in the Shadow 1 & 2. The matching FP spring is part number for S 1 & 2 is 97045. If us...

13# Hammer Spring

13# Hammer Spring

Very popular USA made from music wire 13# hammer spring color-coded "blue". Must be used with our Reduced Power Firing Pin Spring.

Dawson Precision Fiber Optic Front Sight 6.5 mm

050-278 Dawson Precision Fiber Optic Front Sight 6.5 mm

All steel fiber optic front sight works with most "Tactical" or competition rear sights. Measures 6.5mm's total height (.260"). .095" wide so you get more...

OEM Thick Trigger

5 Thick Trigger

CZ factory trigger, "thick" with much less radius than the black trigger. If you want to move the trigger face forward, this is the ideal trigger. Also, con...

Single Action Only Aluminum Trigger

5SAO Single Action Only Aluminum Trigger

5SAO factory trigger CGW modifies for pre-travel, so it will have pre- and over-travel capability. Supplied with a trigger return spring installation slave pi...

OEM Magazine Release Spring

33 Magazine Release Spring

CZ factory magazine release spring. Consider a #35 retaining screw when replacing this spring. Fits all CZ's that use this type spring and Canik/CZ clone se...

Manual Safety Sear Pin

13MS Manual Safety Sear Pin

CZ factory #13 "short" manual safety sear pin. Fits all manual safety, standard lock only work CZ's, 75 full size & compact, RAMI, Shadow, CZ97B, etc. ...

Rubber Magazine Bumper

00850 Rubber Magazine Bumper

Factory CZ part fits Shadow & SP-01 with mag-well, P-01, PCR, etc. Great addition if you want positive magazine insertion. Fits 14, 15, 16, and 18 rou...

Hammer Pin

HPIN Hammer Pin

See "Description" for important installation information. These are super hard, heat treated to RC60, and are a friction fit in Cajun Gun Works hammers, so n...

Starter Punch

Starter Punch

CGW's "Made in the USA" 1/16" forged steel, heavy-duty starter punch. The only specialty tool you need for working on your CZ . You typically cannot remove...

Extended Magazine Release

32ES Extended Magazine Release

CZ factory extended mag release for left hand figure "8" (key hole) mag release openings in 75 series metal/alloy framed CZ's. This part is approximately .100...

Extended Manual Safety Left Hand

OEM Safety LH Shadow SP-01

CZ OEM This is the ambi-LH, "D" style manual safety, some minor fitting is required, fits all manual safety SP-01's and Shadow 1. PLEASE NOTE: DOES NOT FIT...

OEM Right-Hand Detent for Manual Safety

Detent Plunger Right-Hand

CZ factory right-hand detent for manual safety CZ's that use both a left-hand and right-hand detent. For a slightly stiffer and more positive manual safety fe...

Extractor Spring

52 Extractor Spring

"Made in USA" extractor spring for virtually all 75 full size, compacts, Shadow, 85B & 85C, P-01, PCR, 40B, 97B-BD, RAMI, Phantom, 75B and BD, SP-01's, Shad...

51 Extractor Pin

CZ factory extractor pin fits all 75 full size and compacts, Shadow 1 & 2, 85B&C, P-01 (alloy and steel frame), 75D/PCR, 40B&P, 97B&BD, Phantom,...

CZ 75 Series Extractor

50 Extractor for CZ 75

CZ factory extractor, fits virtually all 9 mm 75 full size, compacts, Tactical Sports, SP-01's, Shadow 1 & 2, 85B&C, P-01, P75D/PCR, 40B&P, 75B/BD, ...

Front Sight Retaining Pin

46 Front Sight Retaining Pin

Fits all CZ's and Canik's that use a parallel dovetailed front sight that is retained with a front sight cross pin.

Retaining Screw

35 Retaining Screw

CZ factory screw that retains the trigger bar support spring and mag spring, fits all 75 full size and compacts, Shadow 1 & 2, SP-01's, 85B/C, P-01, 75B/BD,...

Showing 19–36 of 67 results