SRS-2075 Short Reset System RAMI


Double action upgrade and short reset system (SRS) in one kit.  Uses a special hammer spring wound just for the RAMI.  Do not order any other spring kits with this product since this is both a DA upgrade and a short reset in one.


SKU: SRS-2075 Categories: , ,


TECH TIP:  We suggest a 3mm roll pin punch for removal of the firing  pin retaining pin from the slide.  Use this same punch as a guide for lining up the flats on the firing pin, then drive in the new CGW 61100 tempered steel firing pin retaining pin from the left hand side.  Be sure and orient the 61100 with the open end “up” at the 12 0’clock position.