DWX Optic Ready Plate RMSc Footprint

• In house engineered by CGW to perfection for a precise, seam free fit
• Machined to match the contour of the slide. Allows access to extractor pin and firing pin retaining plate
• Manufactured from aerospace grade 7075 aluminum and Type III hard coat anodized to for improved wear resistance
• Lightweight to maintain optimal slide velocity and cycling reliability
• Includes slide to optic plate screws; custom #6-40 T10 screws made in the USA

**Disclaimer**

1. Some older Holosun models will require modification to the mounting screw length
2. Holosun EPS requires the purchase of HM4 4mm screws, All EPS full size models do not include 4mm only 6-32 screws.

Torque Specs: 

• Plate to slide 16-18 inch-pounds with red Loctite
• Optic to plate 18-20 inch-pounds with blue Loctite.
• A quality torque driver is recommended for installation.

NOTE:  Prep the threads on the plate as well as the optic screws.  Use acetone and let air dry before applying Loctite.

Optic to plate screws are NOT included