1492T9

CGW engineered "hybrid" Reach Reduction Disconnector. Combined with the 20030 trigger, this will move the trigger rearward 5 mm's with the hammer down.

This disco will also alter the single action reset characteristcis dramatically by stopping the forward movement of the trigger. The trigger will stop at the precise point of SA reset, the gold standard for improved trigger control.

Only fits the CGW/IWI hammer, part number 20001. Does not fit the factory hammer.

Lifetime warranty.

See "Description" for important installation information.

These are super hard, heat treated to RC60, and are a friction fit in Cajun Gun Works hammers, so no staking or peening is required.  Requires 2 for DA/SA pistols; only 1 is needed for single-action only pistols.  Fits virtually all CZ's that use a CGW performance hammer.

One end of the HPIN has a slight bevel to ensure it starts into the hammer easily.  This bevel also ensures the pin starts straight, eliminating any misalignment.

NOTE:  For factory CZ hammers including CGW part numbers 10035, 10035 D/C, and 10040 CZ Competition hammers and hammer kit, a different hammer pin is needed, see our part number 75009.

See "Description" for Tech Tips and important install information.