Short Reset System for CZ 97

Short Reset System (SRS) for the big bore 97B and BD.  Significantly Reduces the DA pull weight and cuts the SA reset distance 40% or more.

Includes new music wire hammer spring, extended 97 specific firing pin, short arm lifter, spring steel FP retaining pin, and Lite weight firing pin block plunger spring.

Installation Instructions

Compare

$65.00

Description

  • 1- HS-13
  • 1- 61060
  • 1- 61100
  • 1- 14M
  • 1-72750
  • 1- LSpring

 

Tutorial for Manual Safety 97

Tutorial for Decocker 97

TECH TIP:  We suggest a 3mm roll pin punch for removal of the firing  pin retaining pin from the slide.  Use this same punch as a guide for lining up the flats on the firing pin, then drive in the new CGW 61100 tempered steel firing pin retaining pin from the left hand side.  Be sure and orient the 61100 with the open end “up” at the 12 0’clock position.