Short Reset System for SP-01 Phantom

Compare

The SRS-3 is our self defense short reset Phantom kit that doubles as a DA upgrade and at the same time reduces the SA reset up to 50%.   For use in the SP-01 Phantom only.  Includes: HS-15 (gold)  hammer spring, reduced power firing pin block plunger spring, 61100 tempered spring steel firing pin retaining pin, “low-lift” 61050 firing pin w/spring, and our “short” arm lifter.  Fits:  CZ 75 SP-01 Phantom.  NOTE:  DOES NOT FIT THE OMEGA LOCK WORK

$62.00

SKU: SRS-3 Categories: ,

Description

Tutorial for Decocker Series

Tutorial for Manual Safety Series

TECH TIP:  We suggest a 3mm roll pin punch for removal of the firing  pin retaining pin from the slide.  Use this same punch as a guide for lining up the flats on the firing pin, then drive in the new CGW 61100 tempered steel firing pin retaining pin from the left hand side.  Be sure and orient the 61100 with the open end “up” at the 12 0’clock position.

NOTE:  DOES NOT FIT THE OMEGA LOCK WORK