Parts and Accessories

Trigger Bar Support Spring

34 Trigger Bar Support Spring

CZ factory trigger bar support spring, fits all virtually 75 full size, compacts, SP-01's, Shadow 1 & 2, 85B/C, P-01, 75D/PCR, 40B, 97B/BD, RAMI, etc. NO...
$2.00
In Stock
Add to cart
Add to Wishlist
Compare
New Style Slide Stop Spring

3NS Slide Stop Spring New Style

This is the new style factory slide stop spring.  This will not fit the earlier models.  This spring has a very short right angle leg, whereas the old style s...
$2.00
In Stock
Add to cart
Add to Wishlist
Compare
Slide Stop Spring Retention Pin

4 Slide Stop Spring Retention Pin

Factory pin that retains the slide stop spring.
$2.00
Out of Stock
Read more
Add to Wishlist
Compare
Firing Pin Block Stop

40070 Firing Pin Block Stop

Factory CZ firing pin stop plate, fits the early "Pre-B" 75's, Shadow 1 & 2, 85C.  Does not fit the Tactical Sport models.
$9.00
In Stock
Add to cart
Add to Wishlist
Compare
Front Sight Retaining Pin

46 Front Sight Retaining Pin

Fits all CZ's and Canik's that use a parallel dovetailed front sight that is retained with a front sight cross pin.
$1.00
In Stock
Add to cart
Add to Wishlist
Compare
Extractor Pin

51 Extractor Pin

Made in the USA extractor pin, much harder and more durable than the factory pin.  This pin fits all 75 full size and compacts, Shadow 1 & 2, 85B&C, P-...
$3.00
In Stock
Add to cart
Add to Wishlist
Compare
Extractor Spring

52 Extractor Spring

"Made in USA" extractor spring for virtually all 75 full size, compacts, Shadow, 85B & 85C, P-01, PCR, 40B, 97B-BD, RAMI, Phantom, 75B and BD, SP-01's, Shad...
$2.00
In Stock
Add to cart
Add to Wishlist
Compare
Firing Pin Block Plunger 9mm

58 Firing Pin Block Plunger 9mm

Factory CZ firing pin plunger for use in firing pin block system pistols.  Used for both the standard lock work 9 mm and 40 SW caliber and 75 series including ...
$9.00
Out of Stock
Read more
Add to Wishlist
Compare
Manual Safety Trigger Bar

7 Trigger Bar Manual Safety

CZ OEM trigger bar for the manual safety CZ's.  Fits 75 series full size and compact series, SP-01, RAMI, 85B & C, 40B, etc.
$35.00
In Stock
Add to cart
Add to Wishlist
Compare
CZ 97 Loaded Chamber Indicator Pin

97001- Loaded Chamber Indicator Pin for CZ 97

Factory CZ loaded chamber indicator pin for the CZ-97B & 97BD.
$5.00
In Stock
Add to cart
Add to Wishlist
Compare
CZ 97 Loaded Chamber Indicator Plate

97002 Loaded Chamber Indicator Plate for CZ 97

Factory CZ 97002 Loaded Chamber Indicator Plate for CZ 97B and 97BD.
$9.00
Out of Stock
Read more
Add to Wishlist
Compare
CZ 97 Loaded Chamber Indicator Spring

97003- Loaded Chamber Indicator Spring for CZ 97

CZ OEM spring used on the 97001 indicator pin for the 97B and 97BD.
$2.00
Out of Stock
Read more
Add to Wishlist
Compare
CZ 97 Grub Screw

97004 CZ 97 Grub Screw

OEM grub screw used to retain the loaded chamber indicator on the CZ 97B & BD.  See tech tip in product description.
$2.00
Out of Stock
Read more
Add to Wishlist
Compare
CZ P-07 OEM Flat Hammer Spring Plug

97027 Flat Hammer Spring Plug P-07

Factory plastic flat hammer spring plug for P07. NOTE:  Only fits the P-07, does not work in the P-09.
$9.00
Out of Stock
Read more
Add to Wishlist
Compare
CZ Omega Series Magazine Retention Post

97031 Magazine Retention Post Omega Series

CZ factory magazine retention post.  Fits Omega's and the newest version of the P-10 series.
$5.00
Out of Stock
Read more
Add to Wishlist
Compare
Bevel Head Grip Screw

Bevel Head Grip Screw

This is not a factory part, but meets or exceeds OEM quality.  Made from 4140 steel heat treated, this is a flat head, side beveled screw for use with torx 20 ...
$4.00
In Stock
Add to cart
Add to Wishlist
Compare
Decocking Lever Spring for Omega

Decocking Lever Spring for Omega

Decocking Lever Spring for Omega
$5.00
In Stock
Add to cart
Add to Wishlist
Compare
OEM Right-Hand Detent for Manual Safety

Detent Plunger Right-Hand

CZ factory right-hand detent for manual safety CZ's that use both a left-hand and right-hand detent.  For a slightly stiffer and more positive manual safety fe...
$5.00
Out of Stock
Read more
Add to Wishlist
Compare
Extended Left Side Safety Set for Shadow 2

Extended Left Side Safety Set for Shadow 2

OEM CZ Factory extended mag release, fits the Shadow 2 and steel framed P-01, extended LH side and flat RH side safety set. Disclaimer:  May require minor f...
$89.00
Out of Stock
Read more
Add to Wishlist
Compare
Extended Right Side Safety Set with Flat Left Side for Shadow 2

Extended Right Side Safety Set with Flat Left Side for Shadow 2

OEM CZ Factory extended mag release, fits the Shadow 2 and steel framed P-01. Extended RH side and flat LH side safety set. Disclaimer:  May require minor f...
$89.00
Out of Stock
Read more
Add to Wishlist
Compare
Lifter Spring

L-Spring Lifter Spring

Often lost, seldom found. Made in the USA to the same physical dimensions as the factory spring.  Good idea to order a spare or two, especially if you are w...
$3.00
In Stock
Add to cart
Add to Wishlist
Compare
Left Hand Decocking Lever for SP-01 Tactical

Left Side Decocking Lever for CZ SP-01 Tactical

CZ OEM, ambi-left side decocker lever for SP-01 Tactical series.   See part number 10707RH if you need the RH lever assembly as well.  Can also be used on th...
$35.00
Out of Stock
Read more
Add to Wishlist
Compare
CZ Shadow 2 Magazine Catch

Magazine Catch for Shadow 2

OEM Shadow 2 magazine release complete with the serrated "paddle" on the left hand side.  The paddle is adjustable and can be set to your preference.  Will fi...
$35.00
Out of Stock
Read more
Add to Wishlist
Compare

Retaining Screw

This screw retains the trigger bar support spring and mag spring, fits all 75 full size and compacts, Shadow 1 & 2, SP-01's, 85B/C, P-01, 75B/BD, 75D/PCR, 4...
$2.00
In Stock
Add to cart
Add to Wishlist
Compare
CZ SP-01 Tactical RH Decocker Lever

Right Side Decocker Lever for CZ SP-01 Tactical

OEM CZ right side decocker lever for SP-01 Tactical Series.  This is fully assembled with the internal parts so it's ready to install right out of the package....
$27.00
In Stock
Add to cart
Add to Wishlist
Compare
OEM Trigger Bar Decocker

Trigger Bar Decocker

CZ factory decocker specific trigger bar, fits all standard lock work 75 series decocker's, full size, compacts, RAMI's and Phatom. NOTE:  Does not fit the ...
$69.00
Out of Stock
Read more
Add to Wishlist
Compare
Disconnector

Hybrid Disconnector for Shadow 2 Reach Reduction

CGW's iconic reach reduction disconnector for use in the Shadow and non-firing pin block 75 series.  Perfect upgrade if you already have our 75585 trigger. ...
$46.00
In Stock
Add to cart
Add to Wishlist
Compare
Reach Reduction Kit

Reach Reduction Kit

Cajun Gun Works' Reach Reduction Kit moves the at rest position of the trigger rearward an amazing 5.0 mm's.   The "felt" difference is quite dramatic and co...
$88.00 – $103.00
In Stock
Select options
Add to Wishlist
Compare
Reach Reduction Kit Type 2

RRKT2 Reach Reduction Kit Type 2

PLEASE NOTE:  The RRK-T2 must be used with SRS-2 (Short Reset System).  Failure to install the SRS2 will result in a non-functional pistol. Our famous RRK ...
$88.00 – $103.00
In Stock
Select options
Add to Wishlist
Compare
Shadow 2 Reach Reduction Kit

Shadow 2 Reach Reduction Kit

Shadow 2 Reach Reduction Kit with ultra-short reset now USPSA Production approved.  Cajun Gun Works' famous RRK that permanently re-positions the trigger rearw...
$90.50 – $105.50
In Stock
Select options
Add to Wishlist
Compare

Showing 91–120 of 273 results