Short Reset System RAMI

Double action upgrade and short reset system (SRS) in one kit.  Significantly reduces the DA pull weight yet maintains reliable ignition, as well as shortening the SA reset 40% or more.

Uses a 15# hammer spring and extended firing pin, short arm lifter, Lite weight firing pin block plunger spring and spring steel firing pin retaining pin.

Installation Instructions

Compare

$65.00

Description

  • 1- HS152075
  • 1- 61050
  • 1- 61100
  • 1- 14M
  • 1-72750
  • 1- LSpring

 

TECH TIP:  We suggest a 3mm roll pin punch for removal of the firing  pin retaining pin from the slide.  Use this same punch as a guide for lining up the flats on the firing pin, then drive in the new CGW 61100 tempered steel firing pin retaining pin from the left hand side.  Be sure and orient the 61100 with the open end “up” at the 12 0’clock position.