Loaded Chamber Indicator Nut

OEM Loaded Chamber Indicator Nut for CZ 75 D PCR.   Does not include the loaded chamber indicator post or spring, which are sold separately.


In stock

SKU: 06003 Categories: ,


Tech Tip:   Many times the nut can be difficult to remove.  You can custom grind a flat blade screw driver to fit the nut’s slot very firmly.   Worst case scenario, you may need to slowly and gently heat the nut and surrounding area to liquify the factory thread locker using a low temp propane torch.   Be care not to over heat and damage the finish.

We recommend the threads in the slide and as well as the thread on the nut be cleaned with acetone, then apply a small dab of blue loctite when reinstalling.  Do not over tighten if you use thread locker.