54493 Ultra-Lite RAMI

Compare

The ultimate in a light trigger pull and stellar ignition, designed for self-defense and range shooters.  For use in the RAMI and RAMI BD only.   Includes a “Made in the USA” music wire gold HS-15 (15#) hammer spring that sets off any primer, S-7 tool steel extended firing pin w/spring, reduced power firing pin block spring, & 61100 spring steel firing pin retaining pin.

$49.00

Description

Tutorial for Decocker

Tutorial for Manual Safety Series

TECH TIP:  We suggest a 3mm roll pin punch for removal of the firing pin retaining pin from the slide.  Use this same punch as a guide for lining up the flats on the firing pin, then drive in the new CGW 61100 tempered steel firing pin retaining pin from the left hand side.  Be sure and orient the 61100 with the open end “up” at the 12 0’clock position.

 

Additional information

Weight 0.022 lbs
Dimensions 3 × 2 × .25 in