CZ-97 Ultra-Lite Kit


The ultimate in a light trigger pull and stellar ignition, designed for self-defense and range shooters.  For use CZ-97B/BD only.   Includes a “Made in the USA” from music wire blue HS-13 (13#) hammer spring that sets off any primer 100%, gold HS-15 (15#) hammer spring that sets off most primers, S-7 tool steel extended firing pin w/spring, reduced power firing pin block spring, & 61100 spring steel firing pin retaining pin.



Tutorial for All CZ

TECH TIP:  We suggest a 3mm roll pin punch for removal of the firing pin retaining pin from the slide.  Use this same punch as a guide for lining up the flats on the firing pin, then drive in the new Cajun Gun Works 61100 tempered steel firing pin retaining pin from the left hand side.  Be sure and orient the 61100 with the open end “up” at the 12 0’clock position.