51820 Sear Spring Set
These springs allow you to effortlessly tune your single action trigger pull on the P-07/09. CGW .018″ wire diameter (yellow) and .020″ wire diameter (natural) sear springs allow an increase in the single action pull weight and prevent “hammer follow”.
These are mandatory if you use our 91000 high performance CGW Omega hammer.
Use these increased power sear springs to tune your single action pull weight. The yellow spring is the lighter spring and typically increases the single action pull weight about 3-4 ounces.
The non-painted spring is the heavier of the two and will typically increase the single pull weight about 7-9 ounces.
If you install the CGW performance hammer, this spring kit is mandatory to prevent hammer follow.