(318) 738-1464

cajungunworks@gmail.com

Cajun Gun Works uses reasonable efforts to portray accurate, up-to-date information. Products can vary slightly due to manufacturing variations.

Springs & SPG Kits

Grid
List

CZ P-10 C T-Block Plunger Spring

10195 T-Block Plunger Spring for CZ P-10 C

Made in the USA from music wire, CGW's T-block spring is slightly longer than the factory spring. This ensures the take down lever stays firm in the frame und...

New Style Slide Stop Spring

3NS Slide Stop Spring New Style

This is the new style factory slide stop spring. This will not fit the earlier models. This spring has a very short right angle leg, whereas the old style s...

CGW P-10 Striker Spring

CGW P-10 Striker Spring

CGW Precision P-10 Striker Spring rated at 4.4 lbs.

Firing Pin Spring

Firing Pin Spring for Shadow

Firing Pin Spring for Shadow, Tactical Sport, 85C, & 75 pre-B. Premium USA made music wire.

Reduced Power Plunger Spring

RP-FPBS Reduced Power Plunger Spring

CGW engineered music wire reduced power firing pin block plunger spring. This spring is very light, yet 100% reliable, virtually makes the feel of the FP bloc...

Firing Pin Spring

97041 Firing Pin Spring

CGW's reduced power firing pin spring used on our 61050 extended firing pin. Also recommended if you are going with a lighter hammer spring and retaining the ...

CZ P-07 & CZ P-09 Sear Spring Set

51820 Sear Spring Set

These springs allow you to effortlessly tune your single action trigger pull on the P-07/09. CGW .018" wire diameter (yellow) and .020" wire diameter (natura...

CZ RAMI OEM Recoil Spring

60001 RAMI Recoil Spring

Factory RAMI recoil spring assembly with both inner and outer springs and steel guide rod. NOTE: We strongly suggest changing the RAMI recoil spring assemb...

49 Trigger Bar Support Spring P-07/09 and Omega

Factory trigger bar support spring for P-07/09, 75B Omega and P-01 Omega.

15# Hammer Spring

#15 Hammer Spring

Very popular music wire 15# hammer spring color-coded "Gold". Must be used with our Reduced Power Firing Pin Spring.

8.5# Hammer Spring

8.5# Hammer Spring

This a hardcore "competition" music wire 8.5# hammer spring color-coded "white". Must be used with our Reduced Power Firing Pin Spring. CGW has built Shad...

11.5# Hammer Spring

HS-12000 11.5# Hammer Spring

Extremely popular 11.5#, "black" hammer spring commonly used in the Shadow 1 & 2. The matching FP spring is part number for S 1 & 2 is 97045. If us...

13# Hammer Spring

13# Hammer Spring

Very popular USA made from music wire 13# hammer spring color-coded "blue". Must be used with our Reduced Power Firing Pin Spring.

CZ RAMI Ultra-Lite Kit

54493 Ultra-Lite RAMI

Designed to significantly reduce the DA pull weight while retaining reliable ignition for defensive use. For use in the RAMI and RAMI BD only. Includes a "M...

OEM Magazine Release Spring

33 Magazine Release Spring

CZ factory magazine release spring. Consider a #35 retaining screw when replacing this spring. Fits all CZ's that use this type spring and Canik/CZ clone se...

Ultra-Lite Kit

54420 Ultra-Lite Kit

A very popular and extremely effective upgrade. Tens of thousands are in service worldwide. Fixes the minor design issue with the factory firing pin. Co...

CZ P-07 & CZ P-09 Self Defense Spring Kit

SPGK79 Self Defense Spring Kit P-07 P-09

Made in the USA music wire 18# Yellow "self-defense" hammer spring and our "Gold" 15# range/competition use hammer spring. Yellow/self defense will set off ...

3 Piece Spring Kit

3 Piece Spring Kit

CGW's proven "Made in the USA" from music wire, 3 - piece spring kit, replaces the stock hammer spring, firing pin spring, and firing block plunger spring. Re...

Showing 1–18 of 28 results