(318) 738-1464

cajungunworks@gmail.com

Cajun Gun Works uses reasonable efforts to portray accurate, up-to-date information. Products can vary slightly due to manufacturing variations.

CZ 75 D PCR Parts

You cannot add "Sear Cage Decocker" to the cart because the product is out of stock.

Grid
List

Disconnector

1485T2 Disconnector

Type 2 Made in the USA disco, fits all firing pin block equipped CZ's, both manual safety and decockers, to be used in conjunction with the CGW short reset syst...

Hybrid Disconnector

Hybrid Disconnector for RRKT2

CGW's iconic reach reduction disconnector for use in the 75 series firing pin block series. Perfect upgrade if you already have our 75585 trigger. Must be ...

10X Barrel Bushing For Standard Barrel - Black

10X Barrel Bushing For Standard Barrel

There are 2 different barrel diameters for the 75 series: .504" and .550". This bushing only fits the .504". Made from 4140 steel and heat treated to RC50...

14# Compact Recoil Spring

14RSC 14# Compact Recoil Spring

Conventional round wire reduced power 14# recoil spring USA made from music wire, works in 75 series compacts, P-01, 75D/PCR, P-01 Omega, etc. and Canik compact...

Left Side Decocker Lever

60 Decocker Lever Left Side

Factory LH decocker lever for single sided models only. NOTE: will not fit SP-01 Tactical w/ambi deocker levers.

Lifter Arm

Lifter Arm

CGW's short arm lifter. Perfect single-action short reset upgrade if you already have our 61050 or 61060 low-lift firing pin. Made in the USA. Must be us...

Old Style Trigger - Stainless Steel

CGW Triggers

This is a faithful reproduction of the "Old Style" 85C trigger, which comes in stainless steel or DLC for an extra charge. The old style trigger is straighter t...

Combat Trigger

Combat Trigger

Factory original CZ 85 Combat trigger. Great replacement trigger to replace the often complained about black "recurve" trigger. Fits virtually all CZ's that...

Set Screw Package 1

Set Screw Package 1

(2) M3x3 Set Screws (2) M3x4 Set Screws (1) 1.5mm Allen Wrench

Cajun Gun Works Tool Kit

Cajun Gun Works Tool Kit

100% USA-made tools. Includes the 4 most commonly used punches and dual scribe tool. Ideal for CZ pistol work.

Decocker Installation Kit

Our proven decocker install kit, consists of a forged steel, Made in the USA starter punch and sear cage slave pin. Works on 75BD's, RAMI-BD, 97BD, and all...

Decocker Slave Pin

Decocker Slave Pin

See "Description" for very important tech tips. A must for the installation of the decocker sear cage. It is impossible to reassemble the sear cage without...

Moly Grease

SS-Lube Moly Grease

Cajun Gun Works' unique blend of moly and a base that keeps the lube in place. Stable from -20 to 300 degrees F, an outstanding rust barrier, and makes your s...

Starter Punch

Starter Punch

CGW's "Made in the USA" 1/16" forged steel, heavy-duty starter punch. The only specialty tool you need for working on your CZ . You typically cannot remove...

Decocker Sear Pin

13 Decocker Sear Pin

Item number #13, long decocker sear pin. Fits most decocker CZ's, SP-01 Tactical, 75BD, Phantom, P-01, 75D/PCR, RAMI-BD, CZ97-BD, 40P, etc.

Recoil Spring Plug Retaining Pin

23 Hammer Spring Plug Retaining Pin

Pin that retains the hammer spring plug. Fits virtually all 75 full size, compacts, all Shadows, 85B/C, 40B, SP-01's, 97B/BD, etc. NOTE: Does not fit RAMI....

Magazine Guide Retaining Pin

25 Magazine Guide Pin

Upper magazine retaining pin fits all CZ's that use a sheet metal magazine guide.

Floating Trigger Pin

Floating Trigger Pin

A must have for virtually all 75 series CZ's. Developed nearly 10 years ago, this pin has been put to the test globally in tens of thousands of CZ's under eve...

Hammer Pin

HPIN Hammer Pin

See "Description" for important installation information. These are super hard, heat treated to RC60, and are a friction fit in Cajun Gun Works hammers, so n...

Showing 61–79 of 79 results