CGW Springs and Pins for CZ
SPGK1 - 3 - piece spring kits consists of CGW's own 13lb music wire hammer spring, reduced power firing pin spring, and reduced power firing pin block lifter spring. Delivers amazing performance for a small investment.
HS-8500 - This our lightest HS and must be used with an extended firing pin; Federal primers are also recommended. DA pull weights of 5-6 lbs with tuned actions is attainable, "white" in color.
RP-FPS - Our exclusive reduced power firing pin spring, you no longer need to clip, cut, and hope you got it right. Recommended as a replacment for stock FP's as well as extended FP's.
RP-FPBS - Reduced power firing pin block spring. This unique spring is so light, yet effective, you almost can't perceive the FPB in single action.
RP-TRS - Reduced power trigger return spring. Reduces the DA an amazing 1/2 pound, yet still delivers a quick, positive reset. A more durable replacement for the breakage prone stock spring. 100% Made in the USA from premium quality music wire.
TR-PIN - CGW's exclusive floating trigger pin. 1,000's sold. Can easily be installed and removed an unlimited number of times in minutes! Made from heat treated stainless steel, hardened to RC-50. Lifetime warranty! Includes installation slave pin.
LSpring - CZ OEM lifter arm spring, frequently lost, seldom found ! If you only need this spring, S&H is only $3.00. Now Made in the USA!
H-PIN - CGW's own Made in the USA super-hard hammer strut & disconnector pins. Contributes to a smoother action. Heat treated to RC-60. Requires 2.
TUNERS-PAC - 5 premium color coded USA Made music wire recoil springs, 10/white, 11/yellow, 12/red, 13/green, & 14/gray pound rates. Includes "How to select the proper recoil spring" insert card. Fits full size CZ's only, cannot be used in compacts.
Individual Hammer Springs
Firing Pin & Plunger Block Springs
Recoil Springs $6.00 Each
10-RS - White 10#
11-RS - Yellow 11#
12-RS - Red 12#
13-RS - Green 13#
14-RS - Gray 14#
FP-RP - CGW's exclusive M7 alloy tool steel firing pin retaining pin. Super hard but impact resistant. Lifetime warranty fits any CZ with a cross pin that retains the firing pin.
S-PIN - Allows the D/C'er sear cage to be removed W/O having to take it apart. This is a must have for working on the D/C CZ's.
HS-13 - CGW's most popular spring. .250" longer than OEM for outstanding hammer inertia. NOTE: Not recommended for use the the OEM firing pin spring, see RP-FPS, CGW's matching reduced power firing pin spring.
HS-12000 - CGW's custom wound 11.5# hammer spring, recommended only for use with extended firing pins. NOTE: Not recommended for use with the OEM firing pin spring, see RP-FPS, CGW's matching reduced power firing pin spring.
HS-15 - The only reduced power hammer spring recommended for use with the OEM firing pin spring. 15# rated and color coded gold.