Reach Reduction Kit
RRK - CGW's Reach Reduction Kit moves the at rest position of the trigger reward 4.5 to 5.0 mm's. This addresses a long standing complaint concerning the CZ design. The "felt" difference is quite dramatic and completely changes, for the better, the ergonomics of the trigger. Includes SA over travel screw with adjustment wrench. $88.00. Please see our Home Page for shipping fees.
This is a "before" picture of the stock CZ trigger location. Most shooters find the trigger very difficult to reach, even on half-cock
The trigger on this CZ has been effectively moved rearward 5.0 mm's. The improvement is quite dramatic. The distance is even shorter when the hammer is at half-cock
The Most Frequently Asked Questions on the RRK
Is all the initial take-up eliminated with the RRK? No. It only relocates the static position of the trigger.
Is the single action trigger set point moved or changed? No. The SA is not affected in any way.
Is it legal for shooting sports? No. The back-lash set screw installed on the upper area of the trigger is visible. However, you can use the modified disconnector w/o the trigger mod to reduce the DA stroke.
Can the RRK be used with other modifications such as CGW hammer kits? Yes. The ERRK is a completely independent modification and neither affects or is affected by other custom add-ons. The only exception is the Ultra-Lite DA competition kit which is not compatible with the RRK, however the Ultra-Lite S/D works perfectly with the RRK.
Can you use any hammer spring with the RRK? No. Since the DA stroke is shorter and much quicker with the ERRK, the minimum hammer spring recommended is 13#'s. You can use a lighter hammer spring if you use an extended firing pin.
Is the DA "feel" affected? Yes. The RRK significantly shortens and quickens the DA pull stroke. Also the mechanical leverage is altered giving the impression of a much lighter trigger pull.
CGW's tool steel trigger pin is highly recommended with the ERRK. Click on the Springs/Trigger pin tab and see part number TR-PIN
85C - A fully contoured trigger for the utmost in comfort. Trigger is much thinner than the standard CZ trigger improving the reach in DA. SA over-travel set screw and adjustment wrench is included. The perfect replacement for the CZ "recurve" trigger. A much more ergonomic trigger.
5SAO - Single action only aluminum trigger with pre-travel and SA over travel adjustment. Includes allen wrench.
Pease keep in mind, CGW's shipping fees are the most reasonable in the industry!!!!
RRK - Reach Reduction Kit. NOTE: this single kit now fits all CZ's since it uses the single-sided decocker disconnector. This kit will fit the 2 - sided manual safety disconnectors, as well as the 1 - sided decocker disconnector CZ's with no modifications. This will also allow transferring this kit to any CZ excluding the Omega.
6SAO - Straight single action aluminum trigger with pre-and over-travel adjustment